Intelligent Air Cutting Monitoring System for Milling Process

Abstract

This research proposes a method for auto-monitoring the air cutting condition of a machining process, so the air cutting time can be further improved to enhance the machining efficiency. A two-way data communication module with a CNC controller was established to achieve real-time monitoring and control function via TCP/IP protocol. The module enables the identification of the executing NC block and the cutting time during machining. The spindle load current and cutting vibration signals were used to on-line diagnose the cutting state (effective cutting or air cutting), and their associated NC codes were identified and recorded at the same time, based on the executing NC block in the CNC controller. An algorithm adopting this state change information to determine effective cutting time and air cutting time was developed and used to build an intelligent air cutting monitoring system, with a friendly human–machine interface. The system can detect air cutting time, effective cutting time, machine idle time, as well as the total machining time to improve the air cutting time to enhance the machining efficiency. Verification experiments were conducted, and the results showed the proposed method can accurately detect the air cutting occurrence and its associated NC blocks in the NC program.

Keywords

• CNC machine tool
• air cutting time
• machining efficiency
• effective cutting process