Design and Simulation of an Ultra-Low-Power Hydrogen Sulfide Gas Sensor with a Cantilever Structure

Abstract

Metal oxide gas sensors usually require a few tens of milliwatts of power consumption to operate at high temperature, which limits their application in mobile and portable devices. Here, we proposed a cantilever structure to build an ultra-low power gas sensor for hydrogen sulfide gas detection. By employing a nano-film size effect to reduce the thermal conductivity of the material, and self-heated corrugation configuration, the power consumption of the gas sensor is significantly reduced. Through numerical analysis and finite element simulation, two different gas sensors were designed and the power consumption and stress distribution were analyzed and optimized. Under the operating temperature of 200 °C, only 0.27 mW power is consumed, the stress value is less than 250 MPa and the displacement is a few hundred of nanometers. The results serve as a guide and reference for ultra-low power MEMS device designs.

Keywords

• ultra-low power
• gas sensor
• straight beam
• corrugated beam
• size effect