Frontiers in Nuclear Engineering (May 2024)

Investigation of the thermal decomposition of Pu(IV) oxalate: a transmission electron microscopy study

  • Edgar C. Buck,
  • Dallas D. Reilly,
  • Luke E. Sweet,
  • Aaron D. Nicholas,
  • Forrest D. Heller,
  • Gabriel B. Hall,
  • Richard A. Clark,
  • Amanda J. Casella

DOI
https://doi.org/10.3389/fnuen.2024.1380137
Journal volume & issue
Vol. 3

Abstract

Read online

The degradation of the internal structure of plutonium (IV) oxalate during calcination was investigated with Transmission Electron Microscopy (TEM), electron diffraction, Electron Energy-Loss Spectroscopy (EELS), and 4D Scanning TEM (STEM). TEM lift-outs were prepared from samples that had been calcined at 300°C, 450°C, 650°C and 950°C. The resulting phase at all calcination temperatures was identified as PuO2 with electron diffraction. The grain size range was obtained with high-resolution TEM. In addition, 4D STEM images were analyzed to provide grain size distributions. In the 300°C calcined sample, the grains were <10 nm in diameter, at 650°C, the grains ranged from 10 to 20 nm, and by 950°C, the grains were 95–175 nm across. Using the Kolmogorov-Smirnov (K-S) two sample test, it was shown that morphological measurements obtained from 4D-STEM provided statistically significant distributions to distinguish samples at the different calcination conditions. Using STEM-EELS, carbon was shown to be present in the low temperature calcined samples associated with oxalate but had formed carbon (possibly graphite) deposits in the 950°C calcined sample. This work highlights the new methods of STEM-EELS and 4D-STEM for studying the internal structure of special nuclear materials (SNM).

Keywords