Metsanduslikud Uurimused (Jun 2015)

Comparison of the gravimetric sampling and impedance methods for measuring soil moisture content

  • Allman Michal,
  • Jankovský Martin,
  • Allmanová Zuzana,
  • Messingerová Valéria

DOI
https://doi.org/10.1515/fsmu-2015-0002
Journal volume & issue
Vol. 62, no. 1
pp. 14 – 25

Abstract

Read online

This paper was focused on determining whether gravimetric sampling and impedance method of measuring soil moisture content provided different results and if they did, what was the size of the differences between particular methods on rendzinas and cambisols. The means of moisture content should be equal when using both methods on similar spots. During the research, an Eijkelkamp Penetrologger penetrometer equipped with impedance probes and gravimetric sampling cylinders from Eijkelkamp were used. The samples were taken from the undisturbed stand, ruts, and the centre of the skid trail. The impedance probes were inserted six centimetres deep into the soil. Soil samples were taken from similar depth in order to calculate the moisture content through the gravimetric method. 138 measurements were carried out for each method. The minimal difference of moisture contents measured by individual methods was 0.01%, maximal difference was 22.06%, and on average it was 7.42%. Oneway ANOVA was used for first stage analysis of the statistical sample. It proved that the differences between measurements were statistically significant in two out of three considered stands. Tukey’s HSD test was used to identify which data groups contributed to refuting the aforementioned hypothesis. The test showed that in one stand all relevant pairs of data were significantly different, while in the other stand only data pairs from the ruts were significantly different. The calibration method provided by the producers did not refine the accuracy of the impedance probes sufficiently and different calibration procedures have to be used.

Keywords