Production and storage stability of concentrated micellar casein

Abstract

ABSTRACT: Concentrated micellar casein (CMC) is a high-protein ingredient that can be used in process cheese product formulations. The objectives of this study were to develop a process to produce CMC and to evaluate the effect of sodium chloride and sodium citrate on its storage stability. Skim milk was pasteurized at 76°C for 16 s and cooled to ≤4°C. The skim milk was heated to 50°C using a plate heat exchanger and microfiltered with a graded permeability (GP) ceramic microfiltration (MF) membrane system (0.1 μm) in a continuous feed-and-bleed mode (flux of 71.43 L/m2 per hour) using a 3× concentration factor (CF) to produce a 3× MF retentate. Subsequently, the retentate of the first stage was diluted 2× with soft water (2 kg of water: 1 kg of retentate) and again MF at 50°C using a 3× CF. The retentate of the second stage was then cooled to 4°C and stored overnight. The following day, the retentate was heated to 63°C and MF in a recirculation mode until the total solids (TS) reached approximately 22% (wt/wt). Subsequently, the MF system temperature was increased to 74°C and MF until the permeate flux was 25% TS and >95% casein as percentage of TP can be manufactured using GP MF ceramic membranes and could be stored up to 60 d at 4°C. The effects of the small increase in NCN and NPN, as well as the addition of sodium chloride or sodium citrate in CMC during 60 d of storage on process cheese characteristics, will be evaluated in subsequent studies.

Keywords

• microfiltration
• micellar casein
• shelf-life
• proteolysis