Design and Simulation of Aerosol Inlet System for Particulate Matter with a Wide Size Range

Abstract

A novel aerodynamic lens-based inlet system was developed for a wide particle size range, and it could extend the size range of transmitted particulate matter (PM) to 50 nm–10 μm. The lens system adopted a seven-stage aerodynamic focusing orifice to extend the range of transmitted PM, and a relaxation system with a virtual impact function was introduced at the front of the aerodynamic lens. Through the innovative design, the system could concentrate the input samples as well as effectively enhance the focusing effect on large PM. Furthermore, an additional aerodynamic pre-focusing inlet system was innovatively added to the front of the sampling orifice of the traditional aerodynamic lens, and it could pre-focus large PM into the axis region before it entered the small orifice and then solve the previous problem with loss of large PM. Fluid simulations indicated that the inlet system could achieve 100% effective transmission and focusing for PM in the range of 0.18–10 μm. The characterization and verification results obtained from the improved single-particle aerosol mass spectrometer (SPAMS) were remarkably consistent with the theoretical values. The practical tests indicated that bioaerosol particles up to 10 μm could be detected. Compared with the observation for the same type of lens, the focusing performance of this novel lens system has better advantages in particle size range and transmission efficiency and therefore, it has broad application prospects in bioaerosol research, single-cell analysis, etc.

Keywords

• wide range
• pre-focusing inlet port
• aerodynamic lens
• focused particle beam
• virtual impactor