The Effect of a Three-Blade Tube on the Pneumatic Transport of Pebble Particles

Abstract

In this paper, the Computational Fluid Dynamics–Discrete Element Method (CFD-DEM) coupling method was used to simulate the pneumatic transport of pebble particles in a three-blade spiral tube. The results showed that the flow field distribution rotated along the circumference after loading. The maximum velocity of the flow field after loading was manifested as rotation along the circumference. In addition, the swirl intensity decreased exponentially with the increase in conveying distance, and the maximum swirl intensity had a saturation value. After reaching the saturation value, it is not evident that increasing the initial air velocity significantly affected swirl variation. The smaller the pitch, the greater the initial swirl intensity. The swirling flow was conducive to the fluidization of particles, but it would bring a significant energy loss. Increasing the swirl can increase the degree of particle dispersion. There is an optimal tangential airflow velocity, which allows the particles to fully spin and stay in the suspension zone without being thrown onto the pipe wall by excessive centrifugal force. At this time, the energy efficiency reaches the highest level. A 5.87 m/s velocity was deemed the optimal tangential airflow velocity for conveying 3 mm particles.

Keywords

• CFD-DEM
• three-blade tube
• gas–solid two-phase flow
• swirling pneumatic conveying