Lateral Heat Distribution Characteristics of CLP S275 Using Gaussian FFT Algorithm in Optical Thermographic Testing

Abstract

In general, when using infrared thermography (IRT) techniques to excite a heat source on the surface of an inspection object, the heat source is focused on the center of the image of the infrared (IR) camera. If the object to be inspected is small, uniform excitation of the heat source is possible, but if the area is large, the heat source is concentrated locally, resulting in uneven heat distribution. Therefore, in this study, heat distribution was analyzed after inducing a non-uniform heat source by exciting the heat source at different locations. Additionally, the fast Fourier transform (FFT) algorithm with Gaussian filtering was applied to resolve the non-uniform distribution of the heat sources. Excellent results were obtained from the amplitude image, and the effectiveness of the FFT algorithm was verified using the Otsu algorithm. Finally, the signal-to-noise ratio (SNR) was calculated, and the detection ability according to each thinning rate was analyzed.

Keywords

• optical thermography
• fast Fourier transform
• Gaussian filtering
• thermal equalization
• validation evaluation