Microstructure evolution and hydrogen absorption characteristics of gradient-hydrogenated Ti-4.5Al-3V-2Mo-2Fe alloys

Abstract

Ti-4.5Al-3V-2Mo-2Fe rolled material is a dual-phase titanium alloy with an average grain size of less than 3 μm; its optimal superplastic forming temperature of 760 °C is at least 50 °C lower than the temperature required for diffusion bonding, making it challenging to carry out superplastic forming/diffusion bonding within a process window. The promotion of hydrogen on the low-temperature diffusion bonding of the alloy was verified through thermohydrogen processing, and the absorption characteristics of hydrogen in the alloy at various temperatures, holding times, and pressures were investigated. Subsequently, a mathematical model for achieving standardized hydrogen content was developed. X-ray polycrystalline diffractometer (XRD) analysis was utilized to preliminarily explore phase differences in samples with varying levels of hydrogen content. Furthermore, scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron back scatter diffraction (EBSD) and time of flight secondary ion mass spectrometry (TOF-SIMS) were employed to analyze microstructure changes and hydrogen distribution in both the surface and core regions of the titanium alloy following hydrogenation, demonstrating its feasibility for surface hydrogenation treatment of titanium alloy sheets.

Keywords

• Dual-phase titanium alloy
• Thermohydrogen processing
• Microstructure
• Diffusion bonding
• Surface hydrogenation