Baryshok. Enriching colour range of ceramic shapes on clay-based materials of low quality

Abstract

Introduction. This article discusses the possibility of expanding the colour palette of a ceramic shard. Due to the shortage of high-quality clay raw materials for the manufacture of plastic molded facing bricks, the problem of manufacturing ceramic wall materials by semi-dry pressing from low-quality clay rocks is urgent.Materials and methods. The main raw material was non-caking clay raw material with a low content of clay and a high content of silt particles. Some corrective additives were used to expand the colour palette of ceramic bricks. In the article, the authors used both standard methods for determining the physical and mechanical properties and modern methods for studying the phase composition of materials.Results. The possibility of enriching the colour range of a ceramic shard based on non-sintered clay raw materials has been experimentally confirmed, provided that the mixture contains flux additives. When receiving products with a clarified shard, light-colored flutes should be used.Conclusion. The possibility of enriching the colour range of a ceramic cap by adding white-burning clay, introducing bleaching and chromophore additives and technogenic products has been established. Due to the differences in the chemical composition of clay raw materials from individual deposits, an individual approach to each of them is required.

Keywords

• низкокачественное глинистое сырье
• полусухое прессование
• обогащение цветовой гаммы
• керамический черепок
• добавки-плавни