Sensors (Oct 2011)

Improved Kalman Filter Method for Measurement Noise Reduction in Multi Sensor RFID Systems

  • Min Chul Kim,
  • Chang Won Lee,
  • Kyung Kwon Jung,
  • Yeo Sun Kyung,
  • Seung Joon Lee,
  • Ki Hwan Eom

DOI
https://doi.org/10.3390/s111110266
Journal volume & issue
Vol. 11, no. 11
pp. 10266 – 10282

Abstract

Read online

Recently, the range of available Radio Frequency Identification (RFID) tags has been widened to include smart RFID tags which can monitor their varying surroundings. One of the most important factors for better performance of smart RFID system is accurate measurement from various sensors. In the multi-sensing environment, some noisy signals are obtained because of the changing surroundings. We propose in this paper an improved Kalman filter method to reduce noise and obtain correct data. Performance of Kalman filter is determined by a measurement and system noise covariance which are usually called the R and Q variables in the Kalman filter algorithm. Choosing a correct R and Q variable is one of the most important design factors for better performance of the Kalman filter. For this reason, we proposed an improved Kalman filter to advance an ability of noise reduction of the Kalman filter. The measurement noise covariance was only considered because the system architecture is simple and can be adjusted by the neural network. With this method, more accurate data can be obtained with smart RFID tags. In a simulation the proposed improved Kalman filter has 40.1%, 60.4% and 87.5% less Mean Squared Error (MSE) than the conventional Kalman filter method for a temperature sensor, humidity sensor and oxygen sensor, respectively. The performance of the proposed method was also verified with some experiments.

Keywords