Surface Energy‐Assisted Patterning of Vapor Deposited All‐Inorganic Perovskite Arrays for Wearable Optoelectronics

Abstract

Abstract Solution‐based methods for fabricating all‐inorganic perovskite film arrays often suffer from limited control over nucleation and crystallization, resulting in poor homogeneity and coverage. To improve film quality, advanced vapor deposition techniques are employed for continuous film. Here, the vapor deposition strategy to the all‐inorganic perovskite films array, enabling area‐selective deposition of perovskite through substrate modulation is expanded. It can yield a high‐quality perovskite film array with different pixel shapes, various perovskite compositions, and a high resolution of 423 dpi. The resulting photodetector arrays exhibit remarkable optoelectronic performance with an on/off ratio of 13 887 and responsivity of 47.5 A W−1. The device also displays long‐term stability in a damp condition for up to 12 h. Moreover, a pulse monitoring sensor based on the perovskite films array demonstrates stable monitoring for pulse signals after being worn for 12 h and with a low illumination of 0.055 mW cm−2, highlighting the potential application in wearable optoelectronic devices.

Keywords

• all‐inorganic perovskite
• photodetector arrays
• pulse sensing
• surface energy
• vapor deposition