Nanomaterials (Jun 2021)
Four-Period Vertically Stacked SiGe/Si Channel FinFET Fabrication and Its Electrical Characteristics
Abstract
In this paper, to solve the epitaxial thickness limit and the high interface trap density of SiGe channel Fin field effect transistor (FinFET), a four-period vertically stacked SiGe/Si channel FinFET is presented. A high crystal quality of four-period stacked SiGe/Si multilayer epitaxial grown with the thickness of each SiGe layer less than 10 nm is realized on a Si substrate without any structural defect impact by optimizing its epitaxial grown process. Meanwhile, the Ge atomic fraction of the SiGe layers is very uniform and its SiGe/Si interfaces are sharp. Then, a vertical profile of the stacked SiGe/Si Fin is achieved with HBr/O2/He plasma by optimizing its bias voltage and O2 flow. After the four-period vertically stacked SiGe/Si Fin structure is introduced, its FinFET device is successfully fabricated under the same fabrication process as the conventional SiGe FinFET. And it attains better drive current Ion, subthreshold slope (SS) and Ion/Ioff ratio electrical performance compared with the conventional SiGe channel FinFET, whose Fin height of SiGe channel is almost equal to total thickness of SiGe in the four-period stacked SiGe/Si channel FinFET. This may be attributed to that the four-period stacked SiGe/Si Fin structure has larger effective channel width (Weff) and may maintain a better quality and surface interfacial performance during the whole fabrication process. Moreover, Si channel of the stacked SiGe/Si channel turning on first also may have contribution to its better electrical properties. This four-period vertically stacked SiGe/Si channel FinFET device has been demonstrated to be a practical candidate for the future technology nodes.
Keywords