Applied Sciences (Sep 2024)
Research on Key Roof-Cutting Parameters for Surrounding Rock Stability Control in Gob-Side Entry Retention without Coal Pillars in Karst Mountainous Area
Abstract
The differential distribution of original rock stress and stress concentration caused by the variation in coal seam depth in karst topography are critical factors influencing the selection of roof-cutting parameters. Based on this, this study explores a method to determine reasonable roof-cutting parameters by incorporating the characteristics of coal seam depth variation in karst mountainous areas. A mechanical model of the cantilever beam structure for roof cutting in gob-side entry retention (GSER) is constructed, and the critical values and reasonable ranges of roof-cutting height and angle under different burial depths are derived. Furthermore, the displacement and stress evolution characteristics of surrounding rocks in gob-side entry retention under different coal seam burial depths, roof-cutting heights, and roof-cutting angles within the reasonable range of roof-cutting parameters are analyzed. The results show that there is a positive correlation between roof-cutting height and tensile stress in the uncut portion of the main roof, while roof-cutting angle and coal seam depth are negatively correlated with tensile stress. From the perspective of impact, roof-cutting height has a greater impact than roof-cutting angle, followed by coal seam depth. As for the distribution characteristics of the reasonable roof-cutting parameter range, the fan-shaped area of reasonable roof-cutting parameters gradually decreases with increasing coal seam depth. Taking the geological conditions of Anshun Coal Mine as an example, when the burial depth increases from 350 m to 550 m, adjusting the roof-cutting height to 6 m, 7 m, and 8 m, respectively, and setting the roof-cutting angle at 10° can effectively achieve the stability of the surrounding rock in the GSER. The research findings can provide a scientific basis and engineering references for selecting roof-cutting parameters in mines with similar geological conditions.
Keywords
