Sand liquefaction in simple shear tests

Abstract

Liquefaction is a phenomenon marked by a rapid loss of soil strength and stiffness, which generally occurs in loose saturated sandy deposit during earthquake because of the generation of excess pore water pressure. Several experimental researches concluded that liquefied soil behaves as a fluid during ground movement, but after the earthquake motion ceases, due to the dissipation of excess pore water pressure, the liquefied soil recovers its initial stiffness and returns to behave as a solid. Liquefaction resistance of sandy soil can be studied by means of Cyclic Simple Shear (CSS) test or Cyclic Triaxial (CTX) tests. While CTX tests are widely used in liquefaction studies due to their simplicity, CSS tests are more representative of stress conditions produced during an earthquake by simulating the continuous rotation of the principal stress axes. In this research the preliminary results of CSS tests carried out with confining rings on the sandy samples retrieved in the South of Sicily are reported. The apparatus is described in detail. All samples used were obtained from the same type of Italian sand by using same preparation method to minimize the number of factors influencing the results. Moreover, all tests were conducted by a single operator. All experimental results are reported in the plane cyclic resistance ratio (CRR) and number of cycles where liquefaction occurs (Nliq) in order to assess the liquefaction phenomenon.

Keywords

• liquefaction
• cyclic simple shear test
• cyclic resistance curve