Applied Sciences (Dec 2023)

Finite Element Model of Scoliosis Brace with Increased Utility Characteristics

  • Slawomir Grycuk,
  • Piotr Mrozek

DOI
https://doi.org/10.3390/app132413273
Journal volume & issue
Vol. 13, no. 24
p. 13273

Abstract

Read online

Orthoses are of critical importance in the field of medical biomechanics, particularly in the correction of spinal deformities. The objective of the current research was to improve the utility characteristics of the scoliosis brace without compromising its corrective capabilities. The orthotic shell of the Boston brace was used as the basis for this investigation. The finite element method (FEM) was used to evaluate the distribution of corrective forces through the device. The flow of force lines within the orthotic shell was determined by mapping the paths of maximum principal stresses. Areas of the device that had a negligible effect on overall stiffness were identified and material from these areas was eliminated. Minor modifications were then made to the redesigned shell to maintain its corrective stiffness. As a result of these changes, the weight of the braces was reduced without compromising its corrective stiffness. When subjected to corrective forces, the shell’s displacement patterns in the transverse plane showed minimal changes from the original model, confirming that its corrective capacity remained largely intact. This research presents an innovative methodology for orthotic design and demonstrates that structural optimization based on the mapping of maximum principal stress pathways can significantly improve device functionality. The approach outlined here holds promise for future advances in the design of various orthotic devices, thereby contributing to the advancement of the field.

Keywords