Ultimate Compressive Strength of H-Section Stub Columns Subject to Random Pitting Corrosion Damage

Abstract

H-section columns with random pitting corrosion exhibit localized damage, making it imperative to conduct a thorough assessment in order to guarantee their long-term structural safety and integrity. This paper presents a method for constructing finite element models of randomly pitted H-section stub columns. The accuracy of the models was first validated against existing experiments. Various scenarios, accounting for different levels of pitting intensities and locations of corrosion occurrence, were considered, to elucidate the mechanisms of the reduction in ultimate strength and stiffness, as well as the failure of columns. Additionally, the influence of the width-to-thickness ratio of the plate on the ultimate strength of stub columns was also taken into account. A method to address the thickness loss resulting from random pitting corrosion was proposed for the ultimate strength assessment of randomly pitted stub columns, and its accuracy was verified based on the Chinese and European Standards. An empirical formula was proposed and verified upon the results of numerous stochastic simulations of randomly pitted H-section columns. The results demonstrated that for axially loaded H-section stub columns, both ultimate strength and stiffness decrease significantly and nonlinearly with the increase in the degree of pitting damage. Corrosion can change the failure mode of a stub column by inducing local buckling in a plate that initially satisfies the buckling criterion before the overall column failure.

Keywords

• H-section column
• pitting corrosion
• ultimate strength
• failure mode
• equivalent thickness