MATEC Web of Conferences (Jan 2017)

The multi-objective genetic algorithm optimization, of a superplastic forming process, using ansys®

  • Grebenişan Gavril,
  • Salem Nazzal

DOI
https://doi.org/10.1051/matecconf/201712603003
Journal volume & issue
Vol. 126
p. 03003

Abstract

Read online

In the industrial practice, the product is intended to be flawless, with no technological difficulty in making the profile shapes. If this product results without defects, then any Finite Elements Method (FEM) based simulation can support that technology. A technology engineer does not propose, very often to analyze the simulation of the design technology, but rather to try to optimize a solution that he feels feasible. Experiments used as the basis for numerical optimization analysis support their research in the field of superplastic forming. Determining the influence of input parameters on the output parameters, Determining the optimal shape of the product and the optimal initial geometry, the prediction of the cracks and possibly the fractures, the prediction of the final thickness of the sheet, these are the objectives of the research and optimization for this project. The results of the numerical simulations have been compared with the measurements made on parts and sections of the parts obtained by superplastic forming. Of course, the consistency of the results, costs, benefits, and times required to perform numerical simulations are evaluated, but they are not objectives for optimizing the superplastic forming process.