Flow (Jan 2021)

Shaping liquid films by dielectrophoresis

  • Israel Gabay,
  • Federico Paratore,
  • Evgeniy Boyko,
  • Antonio Ramos,
  • Amir D. Gat,
  • Moran Bercovici

DOI
https://doi.org/10.1017/flo.2021.13
Journal volume & issue
Vol. 1

Abstract

Read online

We present a theoretical model and experimental demonstration of thin liquid film deformations due to a dielectric force distribution established by surface electrodes. We model the spatial electric field produced by a pair of parallel electrodes and use it to evaluate the stress on the liquid–air interface through Maxwell stresses. By coupling this force with the Young–Laplace equation, we obtain the deformation of the interface. To validate our theory, we design an experimental set-up which uses microfabricated electrodes to achieve spatial dielectrophoretic actuation of a thin liquid film, while providing measurements of microscale deformations through digital holographic microscopy. We characterize the deformation as a function of the electrode-pair geometry and film thickness, showing very good agreement with the model. Based on the insights from the characterization of the system, we pattern conductive lines of electrode pairs on the surface of a microfluidic chamber and demonstrate the ability to produce complex two-dimensional deformations. The films can remain in liquid form and be dynamically modulated between different configurations or polymerized to create solid structures with high surface quality.

Keywords