The influence of hard segment content on mechanical and thermal properties of polycarbonate-based polyurethane materials

Abstract

Aliphatic segmented polyurethanes were prepared by one-step procedure in catalytic reaction between polycarbonate diol, hexamethylene-diisocyanate and 1,4-butandiol (as chain extender). The hard segment content TS was varied (17, 24, 30 and 42 wt. %) by changing the ratio of starting compounds. The soft segment is made from flexible aliphatic polycarbonate diol, while hard segments consist of chain extender and diisocyanate component. In order to study the hydrogen bonding formation and phase separation, Fourier transform infrared spectroscopy (FT-IR) was used. Wide angle X-ray scattering (WAXS) was performed to determine a degree of crystallinity and to investigate the phase behavior of prepared elastomers. The effect of TS content on mechanical properties (tensile strength, elongation at break and hardness) was tested. Thermal behavior of prepared novel polycarbonate-based polyurethanes was investigated using differential scanning callorimetry (DSC). It was determined that the elastomer which contains the highest amount of urethane groups in its structure (TS content of 42 wt. %) exhibits the most pronounced phase separation and the highest degree of crystallinity. All prepared polyurethanes exhibit high elongation at break (over 700%). The glass transition temperature Tg of prepared samples was in the temperature region from −39 to −36°C, and it was found to be slightly influenced by the soft segment content. The enthalpy of chain segments relaxation in diffused region between hard and soft domains (detected in the temperature range from 35 to 55 °C) was decreased with the increase of hard segment content. The multiple melting of hard segments (connected with the dissruption of physical crosslinks) appeared above 100 °C. It was found that the melting enthalpy linearly increases with the increase of urethane group content. Sample with 42 wt. % of TS has the highest value of melting enthalpy (41.5 J/g).

Keywords

• segmented polyurethanes
• hard segments
• mechanical properties
• glass transition temperature