Department of Mechanical and Materials Engineering, Florida International University , Miami, Florida 33174, United States of America; Center for the Study of Matter at Extreme Conditions (CeSMEC), Florida International University , Miami, Florida 33199, United States of America
Md Shariful Islam Sozal
Department of Mechanical and Materials Engineering, Florida International University , Miami, Florida 33174, United States of America; Center for the Study of Matter at Extreme Conditions (CeSMEC), Florida International University , Miami, Florida 33199, United States of America
Vadym Drozd
Center for the Study of Matter at Extreme Conditions (CeSMEC), Florida International University , Miami, Florida 33199, United States of America
Andriy Durygin
Center for the Study of Matter at Extreme Conditions (CeSMEC), Florida International University , Miami, Florida 33199, United States of America
Zhe Cheng
Department of Mechanical and Materials Engineering, Florida International University , Miami, Florida 33174, United States of America; Center for the Study of Matter at Extreme Conditions (CeSMEC), Florida International University , Miami, Florida 33199, United States of America
BaCo _0.4 Fe _0.4 Zr _0.1 Y _0.1 O _3− _σ (BCFZY) is a proton, oxygen-ion, and electron-hole conducting cathode material for intermediate temperature solid oxide fuel cells. Its electrode reaction mechanism in air with moisture is not well understood. In this study, three types of symmetrical cells with the same BCFZY cathode were fabricated over three related proton conducting electrolytes: BaZr _0.8−x Ce _x Y _0.1 Yb _0.1 O _3− _δ (x = 0.1, 0.4, and 0.7). The cathode shows similar performance over three different electrolytes in dry air but different responses to moisture introduction. The differences are hypothesized to relate to the mutual diffusion at the cathode/electrolyte interface. Such a hypothesis is supported by different techniques such as XRD Rietveld refinement of BCFZY cathode in mixtures with different electrolytes after firing, energy-dispersive X-ray spectroscopy (EDS) line scanning for element concentration distribution at the cathode/electrolyte interface, as well as electrochemical test for a related BaCoFeO-type cathode with Zr replaced by Ce.
