Extraction of Phenolic Compound from Model Pyrolysis Oil Using Deep Eutectic Solvents: Computational Screening and Experimental Validation

Abstract

Green Deep Eutectic Solvents (DESs) are considered here as an alternative to conventional organic solvents and ionic liquids (IL) for the extraction of phenolic compounds from pyrolysis oil. Although ionic liquids have shown a promising future in extraction processes, DESs possess not only most of their remarkable physico-chemical properties, but are also cheaper, easier to prepare and non-toxic, increasing the infatuation with these new moieties to the detriment of ionic liquids. In this work, phenol was selected as a representative of phenolic compounds, and toluene and heptane were used to model the pyrolysis oil. COSMO-RS was used to investigate the interaction between the considered Dess, phenol, n-heptane, and toluene. Two DESs (one ammonium and one phosphonium based) were subsequently used for experimental liquid–liquid extraction. A ternary liquid–liquid equilibrium (LLE) experiment was conducted with different feed concentrations of phenol ranging from 5 to 25 wt% in model oil at 25 °C and at atmospheric pressure. Although both DESs were able to extract phenol from model pyrolysis oil with high distribution ratios, the results showed that ammonium-based DES was more efficient than the phosphonium-based one. The composition of phenol in the raffinate and extract phases was determined using gas chromatography. A similar trend was observed by the COSMO-RS screening for the two DESs.

Keywords

• deep eutectic solvents
• phenolic compounds
• liquid–liquid extraction
• COSMO-RS