Investigation of the mechanical behaviour of frozen fissured sandstone addressing the role of fissure ice

Abstract

Abstract Due to the existence of ice in rock fissures and the complex ice–rock interactions, the exact role of fissure ice in altering the mechanical behaviour of frozen rock mass remains unclear. In this study a series of uniaxial compression experiments were conducted on frozen sandstone samples that bearing precut fissures of different angles at both freezing and room temperatures. The failure process of samples was recorded using a high-speed camera. Besides, a particle flow code-based simulation, addressing the role of fissure ice, was performed. The results indicate that: (1) Freezing does not alter the trend of strength variation concerning the fissure angle, but it does strengthen the samples significantly. (2) At both room and subzero temperatures, the crack initiation mode of the specimens showed a changing trend of "tensile cracking → shear cracking → tensile cracking" as the fissure angle increased. (3) The change in fissure angle leads to a change in the stress state at the fracture end, while the fissure ice, through ice–rock interaction, further alters the fracture's stress state, thereby affecting the initiation and expansion mode of the fracture. Based on the simulation results, three strengthening mechanisms of fissure ice are proposed: (I) under compression, the ice acts as a filling support; (II) the fissure ice shortens the fracture length, resulting in a reduction of the stress intensity factor at the fracture ends; (III) under tensile or shear states, the ice acts as a binder. The above strengthening effects of fissure ice act simultaneously or alternatively at different fissure angles.

Keywords

• Frozen rock mass
• Crack initiation and coalescence
• Ice–rock interaction
• Particle flow code (PFC)
• Strengthening effects