Energies (Feb 2023)

Study on Steam Co-Gasification of Waste Tire Char and Sewage Sludge

  • Grzegorz Czerski,
  • Katarzyna Śpiewak,
  • Dorota Makowska,
  • Barbora Grycova

DOI
https://doi.org/10.3390/en16052156
Journal volume & issue
Vol. 16, no. 5
p. 2156

Abstract

Read online

The large and growing volume of tire waste and sewage sludge requires disposal, for which thermochemical processes such as gasification can be used. Co-gasification of these two waste products allows the tire char to be used as a charge stabilizer and the sewage sludge to improve reactivity and efficiency. The purpose of this study was to evaluate the effect of the composition of a waste tire char and sewage sludge fuel blend on the gasification process, using steam as the gasification agent. Tests were carried out for tire char, municipal sewage sludge, and blends of the two in ratios of 90:10 and 67:33. An analysis of the materials used was carried out (ultimate and proximate analysis as well as ash composition), and isothermal measurements of steam gasification were taken using the thermal volumetric method for temperatures of 800, 850, and 900 °C at an elevated pressure of 1 MPa. On the basis of the results, the formation curves of the main gasification products (H2, CO, CO2, and CH4) were created, the curves for the degree of carbon conversion were plotted, the reactivity indexes were determined for different degrees of conversion (0.25, 0.5, and 0.75), and the quantity and composition of the resulting gas were analyzed. Using the grain model, the kinetic parameters (activation energy and pre-exponential factor) of the gasification reaction were calculated. The addition of municipal sewage sludge had a positive effect on the reactivity of tire char and increased the efficiency of gasification, because it contained components that act as catalysts in the gasification process. There was a favorable effect from the addition and higher amount of sewage sludge on lowering both the activation energy (49.5 kJ/mol and 89.2 kJ/mol for 90:10 and 67:33 blends, respectively) and the pre-exponential factor. A significant improvement in reactivity, with a high degree of conversion and the best gas composition, was obtained for a 90:10 blend at 900 °C.

Keywords