Development of a geothermal-driven multi-output scheme for electricity, cooling, and hydrogen production: Techno-economic assessment and genetic algorithm-based optimization

Abstract

This study aims to develop an environmentally friendly multi-energy system for sustainable production of electricity, cooling and hydrogen. The study introduces a pioneering geothermal-based system, integrating an ejector refrigeration cycle, a dual-loop organic Rankine cycle, and a hydrogen production unit with proton exchange membrane electrolyzers. The study provides a thorough analysis of the system's energy and exergy performance, as well as its economic feasibility. Through sensitivity and parametric analyses, the research identifies key parameters that significantly influence system performance. The system's innovative design promises minimal environmental impact while delivering multifaceted performance: generating 1.38 MW of electricity, supplying 436 kW of cooling load, and producing 5.39 kg/h of hydrogen. In the exergy analysis, Evaporator1 is identified as the primary contributor to exergy loss, representing 34 % of the total exergy destruction. This is followed by the electrolysis unit, the condenser, and the ejector refrigeration cycle, which contribute 18 %, 14 %, and 12 %, respectively. The system achieves optimal efficiency at an organic Rankine cycle turbine1 inlet temperature of 387 K, yielding a power generation of 885.4 kW and an exergy efficiency of 26.7 %. Beyond this temperature, any further increase leads to a decline in power output due to operational disturbances. A multi-criteria optimization using genetic algorithm is applied, resulting in an optimized system with a cost rate of 18.13 $/h and an exergy efficiency of 38.96 %.

Keywords

• Geothermal energy system
• Energy efficiency
• Energy conversion
• Multi-generation system
• Optimization
• Artificial Intelligence