The Wetting Deformation Model of Rockfill and Its Two Methods for Simulating Rockfill Dam Collapse Settlement

Abstract

The wetting deformation of the upstream dam shell material during the impoundment of the core wall rockfill dam seriously affects the safety of the dam. Based on the proposed Ew−νw wetting model, this paper proposes its corresponding two methods to simulate the collapse settlement of the rockfill dam: the initial strain method and the initial stress method. By simulating the collapse settlement of the Guanyinyan core wall rockfill dam, it is found that the simulated result using the initial stress method is in good agreement with the field monitoring data, while the displacement simulated using the initial strain method is larger. The distribution of displacement contours simulated using the initial strain method is obviously inconsistent in the area where the wetting deformation occurs, and the simulation results of the initial stress method are more reasonable. With the rise in the water level, the wetting deformation of the upstream dam shell material causes the tensile stress zone at the top of the dam. Therefore, the wetting deformation is the direct cause of the crack at the top of the dam, and the initial stress method should be preferred in the simulation of the wetting deformation of rockfill materials.