Aerospace (Jun 2024)
Computational Investigations for the Feasibility of Passive Flow Control Devices for Enhanced Aerodynamics of Small-Scale UAVs
Abstract
The 4R-UAV project aims to develop aerodynamically efficient and environmentally friendly UAVs based on the 4R Circular Economy principle. In this study, the feasibility of the application of PFCDs (Passive Flow Control Devices) was investigated for the small-scale low-speed 4R-UAV wing. The application of PFCDs for small-scale UAV wings is relatively unexplored. Two PFCD types, i.e., MVGs (Micro Vortex Generators) and winglets, were considered for the investigations. In the stepwise investigations, the aerodynamic performance of the MVGs and the winglets was analyzed for the short-span 4R-UAV wing, which was developed from the aerodynamically optimized airfoil SG6043mod. MVGs enhanced the wings near stall properties (especially maximum lift coefficient) and contributed to the delayed wing stall of up to 2°. MVGs manifested the main aerodynamic advantage, which was achieved at the higher angles of attack. Winglets, on the other hand, were found to be extremely effective in cruise conditions with improved pre-stall characteristics. Extensive investigations on winglets were carried out by designing six winglet configurations for the 4R-UAV wing. Blended-type winglets performed well and enhanced pre-stall properties by decreasing the drag (up to 10%) of the wing. The main performance improvement was found in the early angles of attack. In the final step, the combined effect of the integrated PFCDs was analyzed. The final wing (integrated MVGs and winglets) also exhibited enhanced performance with nearly 6% increased lift-to-drag ratio in cruise conditions. The limited aerodynamic advantage achieved from the PFCDs in small-scale UAV applications can be useful in specific (civil or military) missions. Further verifications are planned in the future by means of experimental and flight testing.
Keywords
