Natural Rubber Nanocomposites: A Review

Abstract

This paper reviews studies carried out on natural rubber filled with nanofillers such as spherical silica particles (generated by the sol gel reaction), clays and carbon nanostructures. It is shown that the mechanical response of NR is influenced by several parameters including the processing conditions, the state of filler dispersion, the polymer-filler interactions and the filler morphological aspects. Even if the sol gel process conducted in vulcanized rubber yields almost ideal dispersions, rod-shaped particles such as clay, carbon fibers or carbon nanotubes are by far more efficient in terms of mechanical reinforcement on account of their anisotropic character and their ability to orientate in the direction of stretch. The efficiency of layered fillers such as clays or graphitic structures clearly depends on the way they are dispersed (exfoliated) in the rubber. Complete exfoliation still remains difficult to achieve which limits the tremendous nanoreinforcement expected from a single layer of clay or graphite. In all cases, the onset of crystallization is observed at a lower strain value than that of the unfilled matrix due to strain amplification effects.

Keywords

• nanomaterials
• in situ generated particles
• clay particles
• carbon nanomaterials
• natural rubber
• reinforcement