Buildings (Dec 2023)
An Experimental Study on Flexural-Shear Behavior of Composite Beams in Precast Frame Structures with Post-Cast Epoxy Resin Concrete
Abstract
Epoxy resin concrete has superior mechanical properties compared to ordinary concrete, and will play an increasingly important role in urban construction. In this paper, the application effect and prospect of epoxy resin concrete in precast composite frame structures are discussed. Taking the joint surface of the old and new concrete at the end of the composite beam as the research object, three specimens were devised and fabricated. Subsequently, a horizontal cyclic load test was conducted, and the seismic performance indices were analyzed. Multiple finite element models were established to assess the influence of precast concrete strength, the diameter of the longitudinal bar of the beam, the shear span ratio, and the epoxy resin concrete post-cast area, among other factors, on the seismic performance of the beam end. Four findings indicate the following: Firstly, epoxy resin concrete, characterized by its high performance attributes, can be used as a post-cast material in precast concrete structures. Secondly, when the strength of the post-cast epoxy concrete approximates or slightly exceeds that of the precast concrete, and the ratio of longitudinal reinforcement and shear span ratio are appropriately balanced, the operational performance of the composite beam frame structure is enhanced. In addition, when post-cast epoxy resin concrete is employed in the beam-column joint area, the mechanical performance of the composite beam end in the joint area matches or even surpasses that of the structure that was cast in situ. And subsequently, the expansion of post-cast area resulted in better mechanical performance. Finally, when the area of post-cast epoxy resin concrete is a non-node area, the mechanical properties of the composite beam end are worse than the former. However, the amount of epoxy resin concrete used will be greatly reduced, and as the precast node area expands, the bearing capacity of the beam end will increase and gradually approach the cast-in situ structure, indicating that this construction scheme also has advantages.
Keywords
