Enhancing the Strength of Mine Residue Soil by Bioremediation Combined with Biopolymers

Abstract

Traditional soil stabilization methods are usually associated with high energy consumption, carbon emissions, and long-term environmental impact. Recent developments have shown the potential use of bio-based techniques as eco-friendly alternatives for soil stabilization. The present work studies the effects of the addition of the biopolymers xanthan gum (XG) or carboxymethyl cellulose (CMC) to a mine residue soil, combined or not with biostimulation and bioaugmentation techniques, in terms of compressive stress–strain behavior. Unconfined compressive strength (UCS) tests were performed on previously disturbed samples (two cycles of percolation, extraction and homogenization) to evaluate if the biostimulation and bioremediation remain active in a real adverse scenario. The results allowed for us to conclude that both biopolymers, when applied individually (with a content of 1%), are effective stabilizers (CMC allows for unconfined compressive strength increases of up to 109%), showing better results for CMC than Portland cement. The biostimulation of the autochthonous community of the mine residue soil was revealed to be a non-effective technique, even when combined with the biopolymers. However, good results were observed when the bioaugmentation was combined with xanthan gum, with unconfined compressive strength improvements of up to 27%. The study revealed that these bio-based techniques are promising soil engineering techniques, offering environmentally friendly alternatives for sustainable soil stabilization and contributing to a greener and more sustainable future.

Keywords

• biopolymer
• biostimulation
• bioaugmentation
• xanthan gum
• carboxymethyl cellulose
• unconfined compressive strength (UCS) test