Effect of Flux Ratio on Droplet Transfer Behavior in Metal-Cored Arc Welding

Abstract

The effect of flux ratio on metal transfer behavior during metal-cored arc welding was elucidated through investigation using a standard solid wire and three metal-cored wires with flux mass ratios of (2-2) 10%, 15%, and 20%. Investigation was performed using a shadowgraph technique based on images recorded with a high-speed camera equipped with back-laser illumination. We observed that the droplet transfer frequency increased with both the welding current and flux ratio, with the effect of flux ratio being more dominant at low currents. We surmise that this is because the wire sheath area decreases as the flux ratio is increased. Hence, when the welding current is the same, a reduction in the sheath area (i.e., an increase in flux content) leads to an increase in the current density in the sheath, which enlarges the electromagnetic force at the tip of the wire and aids droplet detachment. Conversely, Joule heating is higher at high welding currents than at low currents. This increased temperature shortens the flux column inside the wire, such that the current flow into the molten droplets is more uniform. Hence, the droplet transfer frequency does not increase significantly if the flux ratio is increased in the high current range.

Keywords

• metal-cored arc welding
• metal-cored wire
• flux ratio
• droplet transfer
• current path