Energies (Apr 2022)

Experimental Investigation of Multiple Fry Waste Soya Bean Oil in an Agricultural CI Engine

  • Adhirath Mandal,
  • HaengMuk Cho,
  • Bhupendra Singh Chauhan

DOI
https://doi.org/10.3390/en15093209
Journal volume & issue
Vol. 15, no. 9
p. 3209

Abstract

Read online

Meeting the growing energy demand for sustainability and environmental friendly fuels is a continuous process. Several oxygenated fuels were tried and tested according to the availability depending upon the geographical locations to find a solution against rapidly depleting fossil fuels (gasoline and diesel). In the present investigation, the viability of waste fry cooking oil converted into biodiesel fuel and its various physiocochemical properties was evaluated. In this regard, the performance and emission of a CI engine was compared using biodiesel fuel and mineral diesel fuel. Experimental research was performed on a single-cylinder agricultural CI engine with indirect injection, and biodiesel fuel was used with three different types of fry oils. The fry oil was classified as one-time fry, two-time fry, and three-time fry. Engine efficiency and tail pipe emission attributes were evaluated for the three different fuels. The different fuel blends used for the experiment were B60 and B80 and were tested at full load, at different engine speed (rpm). It was found that brake specific fuel consumption (BSFC) increased with increasing speed, whereas brake thermal efficiency reduced with increasing engine speed. Brake thermal efficiency (BTE) reduces with increase in the engine speed because of a poor air–fuel ratio at high speed. CO2 emission is higher because of the higher density and heating value of the biodiesel fuel, which depends on the blending ratio and the frying time of the fuel. It was also encountered that NOx emission was higher for maximum test fuels except one-time fry waste cooking oil biodiesel at 60% blend, which showed lower NOx than diesel fuel. Smoke opacity in both the blends have a decreasing trend with increasing speed and are lower than pure diesel. The 1FWCOB (fry waste cooking oil biodiesel), 2FWCOB, and 3FWCOB fuel exhaust gas temperature (EGT) is reduced because of higher cetane number and lower heating value. Based on the result obtained, it was concluded that by increasing the frying time of the soya bean waste cooking biodiesel, the emission characteristics and engine performance were affected. The need for sustainable fuel is important, thus the use of waste fry cooking oil is a potential replacement for diesel.

Keywords