Exploring 1,3-Dioxolane Extraction of Poly(3-hydroxybutyrate) and Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from <i>Methylocystis hirsuta</i> and Mixed Methanotrophic Strain: Effect of Biomass-to-Solvent Ratio and Extraction Time

Abstract

The increasing need for biodegradable polymers demands efficient and environmentally friendly extraction methods. In this study, a simple and sustainable method for extracting polyhydroxybutyrate (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate (PHB-co-HV) from Methylocystis hirsuta and a mixed methanotrophic consortium with different biopolymer contents was presented. The extraction of biopolymers with 1,3-dioxolane was initially investigated by varying the biomass-to-solvent ratio (i.e., 1:2 w v−1, 1:4 w v−1, 1:6 w v−1, 1:8 w v−1 and 1:10 w v−1) and extraction time (6, 8 and 10 h) at the boiling point of the solvent and atmospheric pressure. Based on the results of the preliminary tests, and only for the most efficient biomass-to-solvent ratio, the extraction kinetics were also studied over a time interval ranging from 30 min to 6 h. For Methylocystis hirsuta, the investigation of the extraction time showed that the maximum extraction was reached after 30 min, with recovery yields of 87% and 75% and purities of 98.7% and 94% for PHB and PHB-co-HV, respectively. Similarly, the extraction of PHB and PHB-co-HV from a mixed methanotrophic strain yielded 88% w w−1 and 70% w w−1 recovery, respectively, with 98% w w−1 purity, at a biomass-to-solvent ratio of 6 in 30 min.

Keywords

• 1,3-dioxolane solvent poly(3-hydroxybutyrate) extraction
• mixed methanotrophic strain
• poly(3-hydroxybutyrate-co-3-hydroxyvalerate) extraction
• pure methanotrophic strain
• sustainable extraction process