Additively manufactured microwave sensor for glucose level detection in saliva

Abstract

Abstract In this paper, a novel realization of an ink-on-glass microwave sensor for biomedical applications is proposed. The Aerosol Jet Printing (AJP) technology is leveraged to implement a compact single-layer coplanar waveguide sensor featuring arc-shaped interdigital fingers that can accommodate a droplet of the Material-Under-Test (MUT). Such geometry provides a high sensitivity to even a very small deviation of MUT`s electrical properties when placed as a superstrate. An application towards the detection of trace amounts of glucose in saliva, which is a biomarker for diabetes, is showcased. The design and fabrication process of an exemplary sensor is discussed in detail. A circular geometry feature is introduced that helps a droplet to lie over the sensitive region due to wettability difference of glass substrate and silver ink. Sensor operating in K-band is developed providing a tradeoff between circuit size and droplet volume. The study is conducted for an artificial saliva requiring roughly a 0.5 µL droplet where changes in mixture content are proportional to relative changes of sensor`s transmission coefficient in a broad frequency range for occupied vs. empty states. The obtained results show that 10 mg of glucose per 100 ml of saliva can be easily distinguished in a frequency range of 20–30 GHz, whereas a monotonical change is visible for frequencies 20–26 GHz, which indicates the applicability of this sensor towards the detection of saliva-glucose levels and potential application in the detection of small amounts of other substances in liquids.

Keywords

• 3D printing
• Additive manufacturing
• Biosensor
• Coplanar waveguide
• Interdigital capacitor
• Metal-on-glass