Analysis of the influence of the input parameters on the efficiency of the operation of the detander generator unit in the gas network system of the republic of Uzbekistan

Abstract

The article is devoted to the generally recognized dilemma of using secondary energy resources in the transportation and distribution of natural gas. At stations where throttle devices are used, excessive gas pressure as the main component of secondary energy resources for technological processes is practically not used. Currently, the replacement of throttle devices with turbo-expander units is determined by energy and economic efficiency. This is due to the fact that the use of excess gas pressure in the turbo expander both at gas distribution stations and at compressor stations of gas pipelines without preheating has not yet been widely used. Expander-generator technology is probably one of the most effective technologies for reducing the consumption of fuel and energy resources. The combination of expander-generator units with heat pump units contributes to the creation of highly efficient power generating complexes that can generate electricity without burning fuel. Expansion of high-pressure natural gas at gas distribution stations is one of the technologies for generating electricity without combustion. To determine the share of electric energy supplied to the electric network based on the expander-generator set in the gas supply system, an analytical dependence was determined. Based on this, an arithmetic model of the installation with single-stage expander-generator units and steam-compression heat pump units is proposed. All data will be presented in detail in this article.

Keywords

• main gas pipeline
• transported natural gas
• gas distribution station
• process differential pressure
• expander generator
• heat pump installation
• power generation