Geometric accuracy of rock joint surface impressions obtained by less-destructive thermoplastic resin-based method

Abstract

A novel less-destructive field impression method that overcomes the uncertainties in stability assessments of rock joints in historical monuments, due to material sampling or existing destructive test limitations, has been developed. A thermoplastic resin with low fluidity and a short curing time is used to obtain the surface morphology of rock joints owing to its less destructive nature and wide applicability to the walls and ceilings of historical monuments. However, the insufficient filling of this thermoplastic resin can decrease the geometric accuracy of the impressions. Thus, the geometric accuracy of resin impressions and mortar replicas has been examined through laboratory experiments, and the results have been compared with those obtained using existing silicone-based methods, based on the statistical indicators associated with mechanical replicability. The indicator values of the method developed in this study were comparable to those of the replicas in previous studies that have sufficient geometric accuracy to satisfy mechanical replicability requirements. Furthermore, although roughness-coefficient-based methods underestimate the shear strength because of the insufficient filling of thermoplastic resins, they provide an acceptable safety margin in stability assessments of rock joints. The proposed method is suitable for conducting accurate stability assessments of historical monuments and ensuring their conservation.

Keywords

• Shear strength
• Roughness
• Replica
• Masonry structure
• Historical monument