Modeling and simulation of the kinematic behavior of the deployment mechanism of solar array for a 1‐U CubeSat

Abstract

Abstract Kinematics of deployable solar array mechanisms in CubeSat satellites have considerable influence on the stability and attitude control of a satellite, especially in low mass systems as CubeSats. One of the issues with the conventional solar panel deployment mechanisms in CubeSats is the speed of its deployment, especially when position‐lock to hold the panels back from oscillation is lacking. The generated oscillation becomes more pronounced in a system equipped with solar tracking unit and thus, reduces available projected area of the panels and causing fatigue at the yoke and panel hinges. This work aims at modeling and simulation of the 1‐U CubeSat solar panel deployment mechanism vibration control using fisher wire. Two‐fold panel deployment mechanism with a rolling sun‐tracking tilt mechanism was developed. The system performance from viewpoint of vibration analysis was evaluated using mass‐spring‐damper method and bond graph techniques. Numerical simulations and experiments were performed to validate the proposed method. The modeling and computational analysis were done with SOLIDWORKS software. The system was tested for vibration and stability using the seismic mass‐spring‐and‐damper arrangement to validate the model. A 3‐D printing was generated and tested to evaluate its vibration performance and its effects during deployment. The result was such that the two panels attached to a wing hinged at Y – and – Y directions deployed slowly and smoothly at approximately 2 s, giving room for the vibration to decay exponentially towards zero. This agrees with reported works where a DC motor was used to control speed of deployment by increasing time to 6.8 s. The simulated and experimental results of the printed model showed close agreement with the theoretical values with an error of 0.03% in energy supply reliability and up to 400% power generation potential when compared to body mounted solar panels with the same satellite specification without a significant impact on system strength and stability.

Keywords

• bond graph technique
• CubeSat
• deployable solar array
• kinematic studies
• seismic mass‐spring‐and‐damper arrangement