Investigation of Penetration Performance of Zr-based Amorphous Alloy Liner Compared with Copper

Abstract

Zr-based amorphous alloy is a new type of metastable energetic material, which has been exploringly used to design shaped charge (SC) liners by scholars of the military industry. In order to know well how the stand-off distance influences jet penetration performance of liners made by such energetic materials against metal targets, SC static explosion tests were conducted under the same initiation and target conditions but different stand-off distances compared with copper liners. Test results indicate that the jet depth of penetration (DOP) of Zr-based amorphous alloy liners firstly increases slowly and then decreases sharply as the stand-off becomes larger. The optimum stand-off distance is 3.5 times of charge diameter (CD) and the corresponding maximum DOP is about 2.68 CD against the 45# steel plate. The perforation area varies with the stand-off distance. It reaches the maximum when the stand-off is 3.5 CD and the corresponding perforation diameter is about 42mm, also the penetration hole is nearly circular. The jet DOP of Zr-based amorphous alloy liner is smaller than that of copper liner’s while the perforation area is the opposite. The former DOP is about 55.7% of the latter and the former perforation area is about 2.8 times of latter when the stand-off distance is 3.5 CD.

Keywords

• stand-off distance
• energetic liner
• zr-based amorphous alloy
• depth of penetration (dop)
• experimental investigation