Design and Analysis of an Inductive Coupling System for the Early Detection of Heart Failure

Abstract

Heart failure is a common, complex clinical syndrome with high morbidity and mortality. Hemodynamic parameter evaluation is useful for early detection, clinical outcome monitoring, timely treatment, and the overall prognosis of heart failure patients. Therefore, continuous monitoring of hemodynamic parameters helps in the evaluation of patients with suspected heart failure. The hemodynamic parameters change with respect to the contraction and expansion of the heart. Hence, in this research, two circuit-less 30 mm spherical receiver coils were implanted in both the left and right sides of the heart and an external transceiver coil was placed above the chest. The changes in the reflection coefficient of the transceiver coil at the resonant frequency changed depending on the distance between the implanted coils, allowing the contraction and expansion of the heart to be determined. This work was carried out at 13.56 MHz, considering the safety limits imposed by the FCC. The proposed reflection coefficient monitoring technique may distinguish healthy patients from heart failure and heart attack patients. The reflection coefficients at a maximum distance of 50 mm for simulation and measurement are −10.3 dB and −10.6 dB, respectively, at the resonant frequency.

Keywords

• heart failure
• hemodynamic parameters
• resonant frequency
• reflection coefficient
• specific absorption rate