Increasing the Efficiency and Accuracy of Labile Cu Measurement in Wine with Screen-Printed Electrodes

Abstract

Development of oxidative and reductive flavors in wine can be influenced by the concentration and form of Cu within the wine. Electrochemical techniques have been devised to quantitate electrochemically active Cu (labile) in wine, as opposed to inactive Cu (non-labile). However, the electrochemical methods to measure labile Cu may be biased by the wine matrix, require lengthy calibration processes and/or unduly perturb the wine matrix during measurement. In this study, medium exchange stripping potentiometry was utilized with a thin mercury film on a screen-printed carbon electrode to provide a quantitation method that could largely overcome these limitations. The best average recoveries for 0.040 mg/L of labile Cu of 101 ± 15% (n = 12) were observed using composite calibration graphs prepared in oxidized wines and on multiple electrodes and using Pb as an internal standard. Composite calibration curves performed on different electrodes to the sample analysis were as effective in quantifying labile Cu as calibration curves performed on the same electrode as the sample. The results allow selection of a quantitation procedure that will suit the required speed and accuracy of labile Cu determination.

Keywords

• Cu speciation
• wine
• quantitation
• potentiometric stripping analysis
• stripping potentiometry
• calibration
• screen-printed electrode
• thin mercury film