Determination of Leaf pH without Grinding the Sample: Is It Closer to the Reality?

Abstract

This study recommends a non-grinding measurement method of leaf pH which can reduce the destructive interference to the measured fresh-leaf pH values. To verify the accuracy of this method, we measured leaf pH with the non-grinding and grinding method and further assessed the dilution effect on leaf pH in the grinding process. Compared with the non-grinding method, the grinding method significantly increased the measured pH value; leaf pH increased with decreasing leaf–water ratio in the procedure of the grinding method, but gradually stabilized. The grinding effects of severe physical damage and thereafter oxidization of leaf samples, and the dilution effects according to the Debye–Hückel limiting law and acid-base ionization theory, may both contribute to the increased leaf pH measured with the grinding method. Thus, leaf pH measured with the non-grinding method was expected to be much closer to those of leaf sap in vivo and be more suitable to indicating the dynamic variation or instant response of leaf pH to the environmental changes. Finally, considering that non-significant difference had been proved in the measured leaf pH between dried, frozen, refrigerated, and fresh ground samples, a conversion equation was provided to facilitate mutual conversion of the results with non-grinding fresh samples (y) against those with grinding dried samples (as representative) (x): y = 1.097x − 0.722.

Keywords

• foliar pH
• grinding treatment
• pH determination
• plant functional traits
• plant pH
• puncturing