Mechanical Behaviors of Granite after Thermal Shock with Different Cooling Rates

Abstract

During the construction of nuclear waste storage facilities, deep drilling, and geothermal energy development, high-temperature rocks are inevitably subjected to thermal shock. The physical and mechanical behaviors of granite treated with different thermal shocks were analyzed by non-destructive (P-wave velocity test) and destructive tests (uniaxial compression test and Brazil splitting test). The results show that the P-wave velocity (VP), uniaxial compressive strength (UCS), elastic modulus (E), and tensile strength (st) of specimens all decrease with the treatment temperature. Compared with air cooling, water cooling causes greater damage to the mechanical properties of granite. Thermal shock induces thermal stress inside the rock due to inhomogeneous expansion of mineral particles and further causes the initiation and propagation of microcracks which alter the mechanical behaviors of granite. Rapid cooling aggravates the damage degree of specimens. The failure pattern gradually transforms from longitudinal fracture to shear failure with temperature. In addition, there is a good fitting relationship between P-wave velocity and mechanical parameters of granite after different temperature treatments, which indicates P-wave velocity can be used to evaluate rock damage and predict rock mechanical parameters. The research results can provide guidance for high-temperature rock engineering.

Keywords

• high temperature
• granite
• cooling rates
• P-wave velocity
• mechanical properties
• failure patterns