Podzemni Radovi (Jan 2021)

X-ray diffraction and SEM analysis of waste sulfur modification for use in concretes

  • Đorđević Nataša G.,
  • Vlahović Milica M.,
  • Martinović Sanja P.,
  • Bugarčić Mladen D.,
  • Mihajlović Slavica R.

DOI
https://doi.org/10.5937/podrad2138057Q
Journal volume & issue
Vol. 2021, no. 38
pp. 57 – 65

Abstract

Read online

Secondary sulfur obtained as a by-product in the oil refining process is a major problem as an environmental pollutant. One of the possibilities of environmental protection is the use of sulfur obtained in this way as a component of sulfur concrete. Mixing of sulfur with suitable additives can provide longer working lifetime of sulfur concrete, as well as maintenance of the former physical, chemical, and mechanical properties of concrete. Such mixtures are usually called modified sulfur or sulfur cement. Secondary sulfur produced in the oil refining process by the Klaus process (approval of crude oil) cannot be used in this form. In order to be ready for the use of sulfur concrete and asphalt, it is necessary to modify elemental sulfur from cyclic to chain form, obtaining of modified sulfur whose application is as a binding agent in a concrete instead of portland cement is described in this paper. Influence of dicyclopentadien, an organic additive, on sulfur modification has been studied in this research. Microstructure and mineral analysis of modified and unmodified sulfur cement binding are performed using polarized and scanning electron microscopes and X-ray diffraction spectrometer.

Keywords