Optimization of the Laser Drilling Processing Parameters for Carbon Steel Based on Multi-Physics Simulation

Abstract

The laser drilling of carbon steel is always suffered from the formation of slag, the presence of cutting burrs, the generation of a significant quantity of spatter, and the incomplete penetration of the substrate. In order to avoid these defects formed during the laser drilling of carbon steel, the COMSOL multi-physics simulation method was used to model and optimize the laser drilling process. Considering the splash evolution of the material during the complex drilling process, the transient evolution of the temperature field, the flow of the molten fluid, the geometrical changes, and the absorption of the laser energy during the laser drilling process were investigated. The simulated borehole dimensions are consistent with the experimental results. The process parameters have a great influence on the fluid flow pattern and material slag splashing. The laser power has a significant effect on the laser processing compared with the process parameters. With the increase in laser power and the decrease in laser heat source radius, the time required for perforation is reduced, the flow of melt is accelerated, the perforation efficiency is increased, and the hole wall is smoother, but the degree of spattering is greater. The optimized process parameters were obtained: laser heat source radius of 0.3 mm, laser power of 3000 W. These findings can help reduce the machining defects in carbon steel with excellent mechanical properties by optimizing the laser drilling processing parameters.

Keywords

• Laser drilling
• process optimization
• numerical simulation