Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

Abstract

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings’ stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket’s structure parameters and three bearings’ peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objectives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.

Keywords

• Actuator
• Trajectory correction fuze
• Impact loadings
• Optimized Latin hypercube design
• Kriging model
• Optimization algorithm