Assessing the Residual Stand Damage after Thinning with Different Levels of Mechanization

Abstract

Thinning is a silvicultural process in which trees are both harvested selectively and systematically removed from a stand to enhance forest management and ecosystem dynamics. However, this practice is challenged by the mechanical damage to residual trees, and the nature of this damage, particularly on stand damage during mechanized row-thinning and manual selective thinning, in South Korea is unknown. Therefore, objectives of this study were to compare stand damage levels and wound characteristics between three different thinning operations: manual selective, manual row-, and mechanized row-thinning. After thinning, 12%, 15%, and 10% of the residual damaged trees were observed in manual selective, manual row-, and mechanized row-thinning, respectively. Both types of row-thinning predominantly demonstrated damages at the stem and butt region, whereas in manual selective thinning, the most of the damages occurred on the roots. Manual selective thinning exhibited a slightly larger average wound size (207 cm2) compared to mechanized row- (181 cm2) and manual row-thinning (165 cm2). The wound sizes on the stem in mechanized row-thinning were significantly higher than manual selective (p < 0.05). These results may be helpful in understanding exposure to damage among different thinning types and in managing its occurrence in future practices.

Keywords

• thinning operation
• thinning type
• mechanized operation
• residual tree damage
• mechanical damage