Influence of Different Ambient Temperatures on the Thermal Properties of Fiber-Reinforced Structural Lightweight Aggregate Concrete

Abstract

This study reports the influence of different climatic ambient temperatures on the thermal properties of fiber-reinforced lightweight aggregate concrete (LWAC). Lightweight expanded clay aggregates (LECA) with steel (ST) and polypropylene fibers were used in the mix proportions. The steady-state thermal test was performed on concrete samples at the oven-dry state with the measurement taken at six different climatic ambient temperatures of 0 °C, 10 °C, 20 °C, 30 °C, 40 °C, and 50 °C. The results show a linear dependence of thermal conductivity, specific heat, thermal diffusivity and thermal effusivity of fiber-reinforced LWACs against the different ambient temperatures. These ambient temperature variations are discussed as a function of the thermal properties of fiber-reinforced LWAC. The thermal conductivity and thermal diffusivity decrease linearly between 0 °C and 50 °C, whilst the specific heat and thermal effusivity increase linearly between 0 °C and 50 °C. Equations with strong correlations to predict thermal properties of fiber-reinforced LWAC were proposed based on the results of this study. The significance of this research is to propose the dynamic ambient temperature-dependent thermal properties equations that can be used in the energy analysis of the buildings.

Keywords

• fiber-reinforced concrete
• lightweight aggregate concrete
• steel fiber
• polypropylene fiber
• temperature-dependent thermal properties
• thermal conductivity