The Optimal Operating Point for Linearizing an Integrated Optical Lithium Niobate Directional Coupler Modulator

Abstract

The influence of an operating point on the linearity of an integrated optical lithium niobate directional coupler modulator was studied. It was found that the optimal setting for the position of an operating point for suppressing the third-order intermodulation distortion depended on the power of the high-frequency modulation signal. Thus, despite the simple design of the device, the directional coupler modulator requires a complex algorithm for setting an operating point to achieve a high linearity of operation. An active system for setting an operating point based on the low-frequency pilot signal and zeroing its third harmonic was used to demonstrate the possibility of linearization when the amplitude of the modulation signal changes. The use of an operating point control system became possible after limiting the drift of the operating point by etching the dielectric buffer layer in the interelectrode gap. The results obtained look promising for high-performance analog optical links.

Keywords

• microwave photonics
• integrated optics
• broadband modulator
• lithium niobate
• directional coupler
• linearization