Due to its high durability and transparency, soda lime glass holds a huge potential for several applications such as photovoltaics, optical instrumentation and biomedical devices, among others. The different technologies request specific properties, which can be enhanced through the modification of the surface morphology with a nanopattern. Here, we report a simple method to nanostructure a glass surface with soft lithography and wet-chemical etching in potassium hydroxide (KOH) solutions. Glass samples etched with a polymeric mask showed a nanopattern with stripes of widths between 220 and 450 nm and modulated heights between 50 and 200 nm. For different solution concentrations or etching times, the obtained nanopatterns led to an increase or reduction of the water contact angle. The largest increment, ~20 degrees, was achieved by etching the glass for 180 min with 30% KOH concentration, while a super-hydrophilic glass (~9° contact angle) was achieved when etching for 90 min with the same concentration. Optical characterization showed a very low influence of the nanostructured pattern on glass transparency and an increment in UV transmittance for some cases.
