Materials (May 2024)
Research on Lateral Resistance Performance of Prestressed Cross-Laminated Timber–Concrete Composite Structures under Reciprocating Loads
Abstract
Cross-Laminated Timber (CLT) and concrete composite structures represent an architectural system that integrates the strengths of both materials. In this innovative configuration, the CLT and concrete collaborate synergistically, harnessing their individual merits to achieve enhanced structural performance and functionality. Specifically, the CLT offers a lightweight design, superior bending resistance, and immense engineering plasticity, while concrete boasts exceptional compressive strength and durability. This study investigates the mechanical performance of CLT–concrete composite structures through quasi-static reciprocating loading tests in three full-scale CLT shear wall samples. Designed with varying initial prestressing forces and dimensions of the CLT panel, the prestressed CLT–concrete structures demonstrated a reduced dependence on the steel nodes, resulting in an increase in yield load, yield displacement, and maximum load-carrying capacity. Maximum capacity increased by 39.8% and 33.7% under initial prestressing forces of 23 kN and 46 kN on steel strands. Failure occurred due to localized compressive failure on prestressed steel strands and anchor plates. ABAQUS finite element analysis established three refined models, revealing that the increased initial prestressing force moderately enhanced stiffness but reduced ductility under similar cross-sectional dimensions. Furthermore, under consistent CLT material, dimensions, prestressing force, and loading conditions, prestressed CLT–concrete structures exhibited a higher maximum load-bearing capacity than prestressed CLT–steel composite structures. This study proposes structural design recommendations based on experimental and simulation results, incorporating specific assumptions.
Keywords
